Mini Barrel Adjuster – Paul Component Engineering Skip to content
  • Shop
  • Story
  • Videos
  • Contact
  • The Real Deal
Account Cart: 0
Menu
  • Shop
  • Story
  • Videos
  • Contact
  • The Real Deal
Account Cart (0)
Shop | Service Parts | Rim Brake Parts | Mini Barrel Adjuster

Related Products

Related products

  • Baby Groovy Barrel Adjusters

    Baby Groovy Barrel Adjusters

    $20.00 – $60.00Price range: $20.00 through $60.00     Select options

Mini Barrel Adjuster

A single spring-loaded barrel adjuster for Cross Lever, E-Lever, Thumbie, MiniMoto, MotoLite and Klamper Disc Brake.

$5.50

Product Story

This is the little barrel adjuster we use for our Cross Levers, E-Lever, Thumbies, MotoLite, MiniMoto, and Klampers.

To Install: Grease the threads, thread it in about 2/3 of the way, use a little dental pick or something to pull the spring retaining clip off (discard clip), and adjust.

Stay in Touch

Our monthly email is an ongoing bike conversation for creative people who spend a lot of time in their garage.
@ron_kingcage himself came by to deliver and insta @ron_kingcage himself came by to deliver and install a pair of custom stamped, high polished Iris cages for the #CascadeCouger. This bike is getting bonkers!✨ Stop by our booth at Made to see it in person, or head over to @oakridgetrailsalliance for a chance to make it yours!
If you’re hanging out at @made.bike this weekend, If you’re hanging out at @made.bike this weekend, come jump in Paul’s dune buggy and we’ll give you one of these super limited edition stickers!
Our friends @spurcycle just stopped by our booth t Our friends @spurcycle just stopped by our booth to install this sweet hand polished dinger 🔔 onto the #CascadeCougar. This bike just gets shinier and shinier! 🤩
We didn’t say the #CascadeCougar would be a “re-cr We didn’t say the #CascadeCougar would be a “re-creation” of Mr Paul’s old Salsa, we said it would be INSPIRED by it, and @blackcatbicycles was definitely inspired! This painstaking geometrically masked rainbow fade with chrome lettering was finished with a clearcoat and well, just WAIT until you see this thing dipped in polished parts! ✨🤩✨As for the last pic… we’ll take bad photoshop over A.I. any day of the week. 😂 Thanks for the photos @mybucketsgottaholeinit 📷
Our friends at @wolf_tooth_comp sweetened the pot Our friends at @wolf_tooth_comp sweetened the pot by sending over a pair of sweet Waveform pedals for the #CascadeCougar Oakridge Trails fundraiser project. These puppies come in two sizes, 9 different colors, and are 100% user serviceable. The question is… will we really have this bike built in time for the @made.bike show this weekend?!
It can be a little tricky building up a drop-bar b It can be a little tricky building up a drop-bar bike with super wide-range 1X mountain bike gearing using cable actuated disk brakes like our Klampers, but one solution is to throw a @ratiotechnology 12-speed adapter into a SRAM 11-speed “brifter”. Modrone was generous enough to send us this SICK Jab rear derailleur that’s configured specifically for the #CascadeCougar, with a barrel-adjuster and Ratio specific throw. These derailleurs are fully rebuildable, re-configurable, CNC machined, and feature adjustable linkage springs and clutches. Very badass, thanks @madronecycles!
Paul Component Engineering
  • info@paulcomp.com
  • 530–345–4371
  • 11204 Midway
  • Chico, CA 95928
Support
  • Policies
  • Dealer Application
  • Support
  • Story
  • Say Hello
  • Newsletter
  • Gift Certificates
Follow Along
© 2026 — Have a nice ride.