Neo-Retro – Paul Component Engineering Skip to content
  • Shop
  • Story
  • Videos
  • Contact
  • Newsletter
Account Cart: 1
Menu
  • Shop
  • Story
  • Videos
  • Contact
  • Newsletter
Account Cart (1)
View cart “Rack Adapter” has been added to your cart.
Shop | Components | Brakes | Cantilever Brakes | Neo-Retro

Product Videos

Related Products

Related products

  • Moon Unit

    $52.50 – $97.50
    Select options
  • Funky Monkey Cable Hanger

    $54.50 – $79.00
    Select options
  • Rack Adapter

    $42.50
    Add to cart
  • Canti Lever

    $92.50 – $259.00
    Select options

Neo-Retro

The Neo-Retro is a wide-profile cantilever brake with a design based on the geometry of the famous Mafac Tandem brake. Where the Neo-Retro differs from its classic heritage is in its modern materials and adjustability.

$133.00 – $174.00

Clear

Technical Information

  • Material
    6061 Aluminum
  • Weight
    100g
  • Finish
    Anodized or Polished
  • Anodized Color
    Black, Purple or Silver
  • Cable Pull
    Short Pull ↓

    Short pull brakes have less leverage than long pull brakes and require a shorter amount of cable to be pulled when they are actuated.

    They are intended only for use with short pull brake levers such as our Cross Levers or Canti Levers, or short pull drop bar brake levers.

  • Included Brake Pads
    Salmon Kool Stop Thinline
  • Additional Information
    Download
  • Brake Pivot - Exploded View
    Download
  • Exploded Assembly Drawing
    Exploded Assembly Drawing
  • Spring Placement
    Exploded Assembly Drawing

Product Story

The arms of the Neo-Retro are machined from lightweight 6061 aluminum. Their T-shaped cross section prevents the brake from flexing too much under load.

The brake pads mount to slots in the arms that allow for vertical positioning. The toe-in and angle can be fine-tuned thanks to the spherical washers on the brake pad threaded posts.

The long arms give the Neo-Retro lots of mechanical advantage and supreme mud clearance. However, for smaller frames and those with panniers, we will often recommend our narrower Touring Canti brake.

Like all of our brakes, the Neo-Retro has a sealed pivot mechanism. Rubber seals and a stainless steel bushing keep the brake arms turning smoothly no matter what you’re riding through. The spring tension can be adjusted in both pivots to center the brake and to adjust the strength of the return swing.

The Neo-Retro stands out with its stopping power, high adjustability, low easy maintenance, and classic looks. The brakes come with their pivots pre-greased and with all necessary hardware. The Moon Unit cable carrier is not included.

Please note that all of our brakes are sold per wheel.

Stay in Touch

Our monthly email is an ongoing bike conversation for creative people who spend a lot of time in their garage.
📣The 2023 @lostandfoundbikeride registration is 📣The 2023 @lostandfoundbikeride registration is OPEN!📣
 🚵This is EPIC riding in some of the most beautiful areas of the #LostSierra. 🏕️Camping, live music, swimming, and partying with your friends, this is one of our favorite events of the year. 
⛏️Every penny raised by registration goes right back into building local trails and supporting the local mountain communities via @sierratrails .
🥓We’ll be there with our 🔥 Aid Station as usual. Paul himself will feed you pickles and bacon out on course. No, really!
📝LETS GOOOOOOO! 🎉
 📷: @johnprolly
We’ve been offering a front Flat Mount Adapter f We’ve been offering a front Flat Mount Adapter for a few years, so we figured it was about time to make a matching rear. 
  This adapter is +20mm, so good for putting a 160mm rotor on a 140 frame, and also helpful if you need a little more cable housing clearance at the chainstay. We aren’t usually weight-weenies, but after machining a pocket into these they end up at only 9 grams. 
  As usual, these are CNC’d by us to ultra-high tolerance right here in Chico, California. 
  Have a great weekend!
Canti Lever blades fresh out of the tumbler and re Canti Lever blades fresh out of the tumbler and ready for anodizing. As with all of our bearing press-fit features, we hold +/-0.0002” tolerance on these parts. That’s about 5 microns, and for comparison, the average human hair is about 70 microns thick. So yeah, these tolerances are TIGHT is what we’re saying!
Is this weird? Be honest. Is this weird? Be honest.
🚨NEW PAUL HOODIE ALERT🚨 We recently disco 🚨NEW PAUL HOODIE ALERT🚨 
  We recently discovered these absurdly cozy hoodies that are made here in the USA by Royal Apparel and tried a couple samples out and WOW. This is the closest thing to being gently hugged by the world’s softest teddy bear all day. 🧸 
  We just had a batch screenprinted with a giant red MotoLite brake and threw them on the website…LET’S CUDDLE! 
 (Oh yeah, Lucas is a BIRD NERD and no, we don’t know how that chair got broken.)
Going through a folder of photos by @johnprolly fr Going through a folder of photos by @johnprolly from 2018 and we are having some FEELINGS of EXCITEMENT that @downievilleclassic is BACK!🎉 This event is SO much more than a bike race, it’s a big family party with all your bike friends in some of the most beautiful rugged mountains in the #LostSierra. We’ll be bringing back our on-course aid station and breakfast tent downtown to support, and y’all wouldn’t believe how many pounds of bacon and coffee we go through on a weekend like this, it’s wild. Anyways, registration opened Sunday night and rumor has it the fields are filling up pretty quick, so don’t wait to pull the trigger on this, it is hands down the BEST mountain bike party in the USA!
Paul Component Engineering
  • info@paulcomp.com
  • 530–345–4371
  • 11204 Midway
  • Chico, CA 95928
Support
  • Policies
  • Dealer Application
  • Support
  • Story
  • Say Hello
  • Gift Certificates
Follow Along
© 2023 — Have a nice ride.