Microshift Thumbies – Paul Component Engineering Skip to content
  • Shop
  • Story
  • Videos
  • Contact
  • The Real Deal
Account Cart: 0
Menu
  • Shop
  • Story
  • Videos
  • Contact
  • The Real Deal
Account Cart (0)
Shop | Components | Drivetrain | Shifting | Microshift Thumbies

Product Videos

Related Products

Related products

  • Canti Lever

    Canti Lever

    $108.00 – $259.00Price range: $108.00 through $259.00
    Select options
  • SHIMANO Thumbies

    SHIMANO Thumbies

    $76.00 – $197.50Price range: $76.00 through $197.50
    Select options
  • SRAM Thumbies

    SRAM Thumbies

    $76.00 – $197.50Price range: $76.00 through $197.50
    Select options

Microshift Thumbies

Miss thumb shifters? Converting a drop bar bike to flat bars? Want to run a Shimano MTB drivetrain on your drop-bar bike, with shifting accessible right from the flats? These easily transform bar-end (aka “barcon” or “TT”) shifters into thumb-shifters. The Microshift shifters are not included, but are readily available in 8 through 12-speed, Shimano and SRAM versions, and many have an option for friction-shifting. These mounts are also compatible with the Microshift Alfine/Nexus 8-speed shifter (part #BS-N08). Be sure you are using the MTB Microshift (or Gevenalle) model, as the Road version is smaller and will not fit properly.

$76.00 – $197.50Price range: $76.00 through $197.50

Clear

Technical Information

  • Material
    6061 Aluminum
  • Weight
    60g
  • Finish
    Anodized or Polished
  • Anodized Color
    Black or Silver
  • Clamp Size
    22.2mm or 31.8 ↓

    22.2mm is equivalent to 7/8 inches, and is the diameter of most mountain bike handlebars. Many flat bars, risers and city bars have this diameter. It is measured at the end of the bar where grips and brake levers attach. 31.8mm is most commonly used on modern road handlebars near where the stem clamps.

  • Compatible Shifters
    MICROSHIFT and GEVENALLE ↓

    MICROSHIFT MTB or GEVENALLE MTB work great, but the Road version is too small and will not fit.

  • Additional Information
    Download

Product Story

Thumbies bring back the thumb shifting of old, and we think it makes shifting more precise and smoother. These feel much better in our opinion than trigger or twist shifters.

Thumbies have a hinged clamp for an easy installation and fit handlebars with a diameter of 22.2mm or 31.8mm. 22.2mm is equivalent to 7/8 inches, and is the diameter of most mountain bike handlebars. Many flat bars, risers and city bars have this diameter. It is measured at the end of the bar where grips and brake levers attach. 31.8mm is most commonly used on modern road handlebars near where the stem clamps.
The clamp is raised up to give clearance for hydraulic brake levers. They have a shifter mounting boss that fits MICROSHIFT and Gevenalle mountain shifters.

Stay in Touch

Our monthly email is an ongoing bike conversation for creative people who spend a lot of time in their garage.
If you’re hanging out at @made.bike this weekend, If you’re hanging out at @made.bike this weekend, come jump in Paul’s dune buggy and we’ll give you one of these super limited edition stickers!
Our friends @spurcycle just stopped by our booth t Our friends @spurcycle just stopped by our booth to install this sweet hand polished dinger 🔔 onto the #CascadeCougar. This bike just gets shinier and shinier! 🤩
We didn’t say the #CascadeCougar would be a “re-cr We didn’t say the #CascadeCougar would be a “re-creation” of Mr Paul’s old Salsa, we said it would be INSPIRED by it, and @blackcatbicycles was definitely inspired! This painstaking geometrically masked rainbow fade with chrome lettering was finished with a clearcoat and well, just WAIT until you see this thing dipped in polished parts! ✨🤩✨As for the last pic… we’ll take bad photoshop over A.I. any day of the week. 😂 Thanks for the photos @mybucketsgottaholeinit 📷
Our friends at @wolf_tooth_comp sweetened the pot Our friends at @wolf_tooth_comp sweetened the pot by sending over a pair of sweet Waveform pedals for the #CascadeCougar Oakridge Trails fundraiser project. These puppies come in two sizes, 9 different colors, and are 100% user serviceable. The question is… will we really have this bike built in time for the @made.bike show this weekend?!
It can be a little tricky building up a drop-bar b It can be a little tricky building up a drop-bar bike with super wide-range 1X mountain bike gearing using cable actuated disk brakes like our Klampers, but one solution is to throw a @ratiotechnology 12-speed adapter into a SRAM 11-speed “brifter”. Modrone was generous enough to send us this SICK Jab rear derailleur that’s configured specifically for the #CascadeCougar, with a barrel-adjuster and Ratio specific throw. These derailleurs are fully rebuildable, re-configurable, CNC machined, and feature adjustable linkage springs and clutches. Very badass, thanks @madronecycles!
Whew! Our friends at @astralcycling up in Eugene O Whew! Our friends at @astralcycling up in Eugene Oregon hand-laced us these beautiful silver Serpentine wheels for the #CascadeCougar. Both rims are offset for more even spoke tension, we’ve got those Cali-made @whiteind hubs, and some jazzy oil-slick decals🌈. Reminder: we’ll be raffling this bike off to raise money for @oakridgetrailsalliance , so all these top shelf components could end up in YOUR stable!😎
Paul Component Engineering
  • info@paulcomp.com
  • 530–345–4371
  • 11204 Midway
  • Chico, CA 95928
Support
  • Policies
  • Dealer Application
  • Support
  • Story
  • Say Hello
  • Newsletter
  • Gift Certificates
Follow Along
© 2026 — Have a nice ride.