High Flange Front – Paul Component Engineering Skip to content

Covid-19 Update:

We’re still receiving and shipping orders, and really appreciate your support! Please be patient, as it may take a few weeks for orders to be shipped under the current manufacturing circumstances. Rest assured, we will get your parts to you as fast as we are able to, while still observing Covid-19 safety protocols - even if you don't hear from us.

International Customers: We have been seeing parcels sit in customs all over the world for up to 2 weeks with no update to the tracking information. These orders are eventually delivered, you will just have to be extra patient.

To learn more about what it's like to be a machine shop during a pandemic, watch this cool video we made!

Thank you,

The PAUL Crew

  • Shop
  • Story
  • Videos
  • Contact
  • Newsletter
Account Cart: 0
Menu
  • Shop
  • Story
  • Videos
  • Contact
  • Newsletter
Account Cart (0)
Shop | Components | Hubs | Front Hubs | High Flange Front

Related Products

Related products

  • High Flange Rear

    $194.50 – $210.00
    Select options
  • 5mm Quick Release Skewers

    $108.50 – $308.00
    Select options

High Flange Front

The High Flange Front is a front hub with large diameter flanges that perfectly matches our High Flange Rear track hub.

$162.00 – $177.50

Clear

Technical Information

  • Material
    6061 Aluminum
  • Weight
    Quick Release Version: 170gr
    Bolt-On Version (Including Bolts): 216gr
  • Finish
    Anodized
  • Anodized Color
    Black or Silver
  • Dimensions
    Axle Spacing: 100mm
    Flange Diameter: 65m
    Center to Flange: 32.5mm
  • Spoke Holes
    20, 24, 28, 32 ,or 36
  • Spoke Hole Diameter
    2.5mm
  • Additional Information
    Download
  • Exploded Assembly Drawing
    Exploded Assembly Drawing
  • Axle Bolt Torque
    21 N·m

Product Story

We machine these hubs from three inch round bars of 6061 aluminum. The hub shells are put through four different machining processes before they go to finishing. The end result is something we’re very proud of. The wide flanges have six window cutouts in them to save weight and draw on the influence of classic track hubs.

The axle is ground from 7075 aluminum, which has a great strength to weight ratio. The outer lock nut faces are made of knurled steel for a solid grip against dropouts. Two different axles are available, for a bolt-on or quick-release attachment. Service Parts are available to convert between axle types.

High Flange Front comes with Enduro sealed bearings, and they can be adjusted with our simple adjuster ring.

Spoke hole counts are available in 20, 24, 28, 32, and 36, and the spoke holes are chamfered to reduce stress on the head and elbow of the spoke.

 

Stay in Touch

Our monthly email is an ongoing bike conversation for creative people who spend a lot of time in their garage.
We’re super lucky to have a network of great bik We’re super lucky to have a network of great bike paths in Chico, one of which follows an old railroad route and leads right to the back gate of our shop! Bike commuting is awesome, and we figured it was time for us to pitch in, so we adopted a little stretch of path, and we go and pick up all the trash every couple months. 🚮 Ding your bell if you see us out there! 🛎
We got a package in the mail from @alternativebike We got a package in the mail from @alternativebikeco the other day with these blasts from our past in the box. Back when Moon Units were smaller and had a more finicky pinch bolt, back when people bought brake lever extensions so you could use your brakes from your bar-ends, and back when instructions were rudimentary drawings and said things like: “Hey- Be cool to the ground.” Thanks for the trip down memory lane!
Mike P won the #SierraOddity, what a lucky devil! Mike P won the #SierraOddity, what a lucky devil! Thank you so much to everyone who contributed parts and labor to this project, and an even bigger thanks to everyone like Mike who were willing to chip in and support @camtborg and all the work THEY put into trail advocacy. Good feelings all around! Now then…what kind of bike should we build @sierranevada next year?…🤔
Mark and Calvin of @paragonmachine stopped by the Mark and Calvin of @paragonmachine stopped by the shop on their way up to Butte Meadows. It’s a long ride all uphill from here, but they brought plenty of bleach to drink, so they’ll be fine. Have fun dudes, great to see ya!
Our friends over at @dynaplug are donating their S Our friends over at @dynaplug are donating their Sea Otter bike to raise money for our other friends at @sierratrails, so if you want a @statebicycleco cruiser dipped in @paulcomponent @whiteind @velocityusa @philwoodandco @btchn.bikes @ron_kingcage and @dingobags, head up to the link in our bio and throw your fiver in the hat!
Holy heck, our buddy Tyler over at @btchn.bikes ha Holy heck, our buddy Tyler over at @btchn.bikes has brewed up something wild yet again! Head directly over to #TheRadavist.com and put your peepers on the full gallery. 🤯 📷: @jadeelhardt
Paul Component Engineering
  • info@paulcomp.com
  • 530–345–4371
  • 11204 Midway
  • Chico, CA 95928
Support
  • Policies
  • Dealer Application
  • Support
  • Story
  • Say Hello
  • Gift Certificates
Follow Along
© 2022 — Have a nice ride.